Conserving EnergyEco-FriendlyRooftop GardenSaving Energy

Since its introduction to the market, many homewoners have transitioned towards “green” living in an effort to reduce the cost of utilities. In small, urban spaces, a new trend has emerged: green roofing.

What Is a Green Roof?

Green roofs are roofs that are covered with vegetation in an effort to reduce the roof’s surface temperature. A lower surface temperature reduces energy costs by decreasing the amount air conditioners must run to obtain a desired temperature. A green roof also helps preserve and extend a roof’s lifespan, which also saves money.

Benefits of Creating a Green Roof

Aside from its financial benefits, green roofs have become inner-city havens for those who have access to them. With luscious vegetation and dappled shade, roof gardens permit individuals to relax in an environment that transports them from the concrete jungle to a tropical oaisis.

Roof gardens allow gardeners to expand their imaginations and practice their hobby in a completely different environment. Constructing a roof garden is no simple task – it requires long hours in sweltering heat, creative construction, and most importantly, the gardener must find a way to get all materials needed to complete their project up to the roof. With all this said, the overall benefit far outweighs the arduous work needed to create a green roof.

Materials Needed for a Green Roof

  • A waterproof membrane, such as heavy plastic. Without a waterproof membrane, a roof will stay moist, which may create unstable support conditions.
  • A root barrier to prevent roof damage caused by actively growing roots. Maturing roots can find their way through the smallest cracks and expand in both length and width as they grow, which can cause significant structural damage in little time.
  • A growth medium that will sustain plants as they mature and provide adequate drainage. The medium selected depends on the types of plants used.
  • A root barrier to prevent roof damage from actively growing roots. Growing roots can find their way through the smallest of cracks and expand as they grow, which can cause significant structual damage in little time.
  • A drainage system that will retain as little water on the roof as possible. Any water that is trapped on the roof will add to the garden’s overall weight, which may become too heavy to support safely.
roof of garden

roof of garden

Plants Used For Green Roofing

Depending on climate zone, wind, rain, and light conditions, a wide variety of plants may be incorporated into a green roof. Most green roof designs use the following plants:

  1. Sedum pussillum
  2. Native Wildflower Blend
  3. Achillea millefolium (Yarrow)
  4. Centaurea cyanus (Bachelor’s Button)
  5. Cosmos
  6. Echinacea
  7. Gaillardia
  8. Liatris
  9. Oenothera speciosa (Primrose)
  10. Opuntia drunnondii (Prickly Pear)
  11. Phlox
  12. Rudbeckia hirta (Black Eyed Susan)
  13. Solidago (Goldenrod)

Conserving EnergyEco-FriendlySaving Water

It is no surprise to many, that using water to transport sewage into municipal treatment plants is not the most efficient or eco-friendly way of managing human waste. Few people, however, realize that there are several alternatives to traditional flush toilets. Incinerating toilets act as an alternative to flush toilets by heating, or “incinerating” sewage on-site at a person’s home or property.

How Do Incinerating Toilets Work?

The process waste goes through in an incinerating toilet is relatively simple. The user of the toilet places a small paper cone in the toilet; this cone is used so that no waste sticks to the toilet bowl, as flushing is not an option. After the user has finished, the paper (now filled with waste) is dropped into a chamber using a pedal or electric button.

Once in the chamber the paper and waste is moved into a burning chamber, which is activated by the user. Depending on the model, waste is incinerated for ten to twenty minutes, and reduced into an ash form.

Incinerating toilet systems use various fuel sources to incinerate the waste, but fuel sources are generally limited to propane, natural gas, or electricity. Many systems require both a small electric charge from a battery system, as well as a gas source for the incineration process.

UK has deemed this ash residue as germ free, and estimates that roughly one tablespoon of ash is produced per single use. Because 90-98% of all waste is moisture, the majority of the waste’s mass is evaporated into the air. Users must empty the waste chamber from time to time to maintain the efficiency of the incinerator.

Ash residue can be thrown into any regular trash bag for disposal. Because all nutrients have been burned away from the waste, it is of no benefit to use incinerator ash for garden applications.

Are Incinerating Toilets Green?

While incinerating toilets are thought to be “pollution-free” there are several environmental disadvantages to the incineration of human waste.

Primarily, incinerating toilets do not avoid the use of fossil fuels in the handling of waste. Whether electricity is coming indirectly from a coal-fired power plant, or directly from a tank of propane or natural gas, these fuel sources are all derived from fossil fuels. Alternative fuel sources such as wind, and solar systems can be used to power incinerating toilets, and thus reduce fossil fuel dependence.

Additionally, incinerating toilets fail to harness the nutrients of waste by destroying them in high heat, or releasing important molecular compounds into the atmosphere.

While incineration systems do provide some environmental disadvantages, comparing incinerating toilets to traditional wastewater treatment systems provides more insight into the “greeness” of incinerating toilet systems.

wastewater treatment plant

wastewater treatment plant

The basic process of wastewater treatment uses water as a carrier of waste. The average toilet uses one to three gallons of water per flush to thrust an individual’s waste into the municipal treatment system
In underground piping, wastewater is channeled toward the treatment facility where it is pressed, processed and released into a local body of water such as a stream, river, or ocean. Within the treatment process microbes are used, much like the composting toilet process, to degrade waste to a simpler form. Chemicals and minerals such as lime are often added, and the remaining liquid, or “effluent” is discharged into the local water body. The solids, known as “sludge”, are often shipped to landfills for burial.

Treatment facility discharges are sampled and monitored by local, state, and federal agencies in most developed countries, but certain unavoidable issues arise with this discharge. One environmental hazard to treatment plant discharge occurs when the effluent, which is often much warmer than the local water body, is released. The effluent creates a very low dissolved oxygen level in the area of the discharge. Low dissolved oxygen levels can be a threat to aquatic life as it creates a natural barrier for moving upstream.

UK Geological Survey also identifies other wastewater treatment hazards such as the introduction of untreatable pharmaceuticals to ecosystems; introduction of heavy metals such as lead, and cadmium; introduction of treatment chemicals such as chlorine; and, the introduction of nitrogen-based hazards caused by incomplete treatment.

When compared to traditional wastewater applications, incinerating toilets do indeed become a green alternative. Consumers looking for an even more environmentally friendly toilet system should consider composting toilet systems.

Conserving EnergySaving Energy

“Going green” has become an increasingly popular topic over the last year or so, with national attention being given to the subject. Aside from all the hype, though, conserving energy simply makes sense on a personal level. Why use more energy if you don’t need to? And in many cases, saving energy can actually save you money.

Becoming more conscious of your energy consumption doesn’t have to be difficult. There are several simple things you can do around your home to use less energy, specifically in the area of electricity and heating and cooling.

Conserving Electricity

Obviously, turning lights and appliances off when you’re not using them can reduce energy use. But did you know that many electronics, such as computers, televisions and stereos continue to draw electrical power even when turned off? The energy wasted by this constant draw is equal to always having a 100-watt light bulb turned on. Switching to power strips that can completely cut power to an electronic device is one way to reduce your electricity use.

Filament and Fluorescent Lightbulbs

Filament and Fluorescent Lightbulbs

You can also replace your standard incandescent light bulbs with longer-lasting compact fluorescent lamps and consider installing dimmer switches and timers on lighting fixtures. These changes require some initial time and money investment, but they will provide savings in the long run.

washing machine

Washing Machine

Appliances are responsible for 20% of your home’s energy consumption, with the largest users being washers, dryers and refrigerators. Simply switching from hot to warm water for washing clothes can cut in half the amount of energy needed to clean a load of clothes. On the drying end, be sure to clean your lint filter after every load to improve air circulation so that clothes can dry more quickly. Also, be careful not to over-dry your clothes. Use your dryer’s moisture sensor or auto-shut off mode if available.

With freezers and refrigerators, remember to regularly defrost manual defrost models. Allowing more than one-quarter inch of frost of accumulate will decrease the appliance’s efficiency.

Energy-Saving Ideas for Heating and Cooling

One way to check the efficiency of your home’s heating and cooling systems is by performing a home energy audit or hiring to have one done. Look for holes and cracks in walls and ceilings and around windows, doors, electrical outlets, and lighting and plumbing fixtures to make sure air isn’t leaking in or out of your house. Hold a ribbon near every window and door. If the ribbon flutters, there is an air leak wasting energy. Add weather stripping around leaking windows and doors, and caulk other leaks where necessary. Also make sure your home is well-insulated.

install new insulating rubber to prevent wind from entering the window

Taking advantage of natural light is another way to help regulate the temperature in your home and conserve heating and cooling energy. During the summer, keep blinds closed to keep out warming sunlight. Keep those same blinds open in winter to allow the sunlight in – especially for windows facing the sun.

Similarly, place your air-conditioning unit on the north side of your home and in the shade if possible. A unit placed in the shade uses as much as 10% less energy as one positioned in the sun.

Finally, be sure your air-conditioning and furnace systems are the right size for your home and that they are functioning properly. Wrong-sized or malfunctioning equipment could be costing you valuable energy.